Moinho picador SM 400 XL

Download Brochure PDF com informações
Close

Language:


Cutting mills are suitable for the grinding of soft, medium-hard, tough, elastic, fibrous, and heterogeneous mixes of products. The Cutting Mill SM 400 XL is ideally suited for pre-cutting of large sample pieces but, depending on the application,  may also achieve the required fineness in one step.

The high torque of the new 3 kW drive with flywheel mass allows for an exceptionally effective preliminary size reduction of heterogeneous mixtures, such as waste or electronic components.

The cutting mill is used successfully for a great variety of materials. The sample is only moderately warmed up during the grinding process so that the mill is perfectly suitable for grinding temperature-sensitive materials.  Due to the large open surface of the 240 mm x 240 mm bottom sieve, it is possible to grind large sample quantities and to increase the throughput.

When operated with the optional cyclone-suction-combination, the SM 400 XL is also suitable for grinding light sample materials. In combination with the wide choice of bottom sieves, hoppers and collecting vessels, the mill can be easily adapted to varying application requirements.

Exemplos de aplicação

alimentação animal, alimentos, borracha, brinquedos de plástico, cabos, componentes eletrônicos, condimentos, couro, escória de alumínio, filmes, linhito, lixo, madeira, metais não ferrosos, misturas de materiais, ossos, palha, papel, papelão, partes de plantas, Plásticos, polímeros, pré-moldados de PET, produtos farmacêuticos, ração em pastilhas, refuse derived fuels, resinas, têxteis, ... continue to application database

Vantagens dos produtos

  • powerful size reduction thanks to 3 kW drive
  • efeitos de corte ótimos
  • accepts large feed sizes up to 170 mm x 220 mm
  • quick and easy cleaning due to fold-back hopper, smooth surfaces
  • defined final fineness due to bottom sieves with aperture sizes from 1 - 20 mm

Características de desempenho

Aplicação fragmentação por corte
Campo de aplicação Agricultura, alimentos, ambiente / reciclagem, Biologia, Mecânica / Eletrotécnica, Medicina / Farmácia, Química / Plásticos
Material a processar mole, semiduro, tenaz, elástico, fibroso
Princípio de fragmentação cisalhamento, corte
Granulometria inicial* < 170 x 220 mm
Finura final* 1 - 20 mm
Volume da câmara de moagem ~7.45L
Velocidade a 50 Hz (60 Hz) 280 min-1
Velocidade tangencial do rotor 2.25 m/s
Diâmetro do rotor 152 mm
Tipos de rotor parallel section rotor
Tipos de funil universal, material longo
Material das ferramentas de moagem aço temperado, carbeto de tungstênio
Tamanhos de peneira trapezoid holes 1.00 / 2.00 mm
round holes 4.00 / 6.00 / 8.00 / 10.00 / 20.00 mm
Sistemas coletores / capacidades collecting receptacle 5 l
optional: cyclone-suction combination
Acionamento motor trifásico
Potência de acionamento 3 kW with flywheel mass
Dados de conexão elétrica voltagens diferentes
Conexão elétrica trifásico
Freio do motor -
Código de proteção IP 54
L x A x P fechado 695 x 1399 x 719 mm
Peso líquido ~ 180 kg
Normas e padrões CE

Please note:
*dependendo do material a processar e da configuração/ajuste do equipamento

Princípio de funcionamento

Size reduction in the Cutting Mill SM 400 XL takes place by cutting and shearing forces. The sample hits the rotor and is comminuted between the blades and the stationary cutting bars inserted in the housing.

Thanks to the wide range of accessories, the SM 400 XL can be easily adapted to different application requirements

Sujeito a alterações técnicas e erros